1.5 Ton 13 SEER AC with Upflow/Horizontal  80% 40000 BTU Furnace
Click To Enlarge

1.5 Ton 13 SEER Air Conditioner R-410a with Evaporator Coil 14" wide and 40,000 BTU 80% Upflow/Horizontal Gas Furnace System - GSX130181 GMS80403AN

 

The Goodman GSX130181 1.5 ton 13 SEER Air Conditioner with R-410a liquid refrigerant is one of those rare air conditioners that provide efficient cooling performance and last for a very long time as well. Goodman air conditioners are few of the air conditioners that employ the chlorine free liquid refrigerant method, that makes it friendly to the ozone layer in the atmosphere, and the noise performance is considered to be the best by HVAC experts.

Due to its 13 SEER rating, it is going to cut down on your electricity expense and high efficiency Copeland processor will provide efficient cooling for a very long time.

Features of Goodman GSX130181 1.5 Ton 13 SEER Air Conditioner

  • Liquid refrigerant return protection
  • Condenser fan motor (850 RPM)
  • Heavy gauged galvanized steel cabinet
  • Steel louvered coil guard
  • Suction line valves and Brass liquid
  • Liquid lined filter dryer
  • Aluminum fin coil 
  • Ground lug connection 
  • Contactor with lug connection 

Goodman 40,000 BTU 80% AFUE Upflow Furnace Model Number GMS80403AN

GMS80403AN Gas Furnace 80% AFUE,Multi-Position Installation.

The GMS80403AN 40,000 BTU up to 80% AFUE Performance Upflow gas furnace system from Goodman features several components that significantly enhance the efficiency and overall comfort of your home. The Goodman GMS80403AN furnaces feature the award winning, durable aluminized steel, reframed into a dual diameter configuration that vastly increases the reliability, durability and efficiency of the furnace. Not only this, this furnace incorporates a well insulated, heavy gauge steel cabinet that contributes in lowering the system operational sound levels to a negligible extent, providing comfortable and quiet heating for your home.

This furnace also features a patented aluminized steel tubular heat exchanger and a fully insulated Silicon Nitride hot surface ignition system. The entire furnace is run tested in the factory tested prior to shipment for both heating and heating/cooling system combinations. Though, the GMS80403AN furnaces are originally meant to burn natural gas, it can also be converted to a propane gas burning unit using an optional LPM-06 field installed propane conversion kit . The GMH8 40,000 BTU 80% AFUE furnace system requires a single stage thermostat whose heating stages are predominantly controlled by a timer fitted into the control board.

Product Features:

  • Four speed, quiet, direct drive circulating blower motor
  • Most of the models are available with lower NOx emissions
  • 110V Silicon Nitride igniter
  • Control board has the provision to store the last 5 diagnostic codes in memory
  • Self adjusting features enables automatic adjustment of the furnace to a high or low stage operation based on the outdoor       temperature without an external temperature sensor
  • The furnace control board has self diagnostics, color coded
  • Low Constant fan allows the users to activate the low heat speed for even circulation of air throughout the home
  • Certain models available with lower NOx emissions
  • Energy-saving, reliable hot surface ignition system with patented adaptive learning algorithm to maximize igniter life
  • Outlet air-limit switch, Multiple flame roll-out switches, blower door safety switch and pressure switch for proof of combustion air
  • Corrosion-resistant, quiet,  induced draft blower assembly
  • Aluminized steel inshot burners
  • A combustion rotating air blower (GMS8) that provides the option of venting the furnace through the top, right-hand side or left-hand side
  • 40VA transformer for heating and air conditioning control service
  • Combination redundant gas valve and regulator
  • Convenient left or right connection for gas and electric service
  • Attractive architectural gray paint finish
  • Heavy-gauge, fully insulated,  reinforced steel cabinet with long lasting baked-enamel finish
  • Coil and furnace fit flush for easy installation
  • Removable, solid-bottom block off
  • Bottom or side air inlet (GMS8)

 The Goodman CHPF1824A6 evaporator coil is 14” wide and weighs 36 lbs. It is used for heat pumps and split air conditioners.  It can be used with two different tonnages and for smaller tonnages, this Goodman horizontal coil comes with an orifice or flowrater.  If you have a higher tonnage heat pump or an air conditioner then accordingly the flowrater of the same tonnage will be used.  ThisGoodman horizontal evaporator coil is perfect for the ACs with the cooling capacity of 24000 BTUs.

Be assured to have high durability as the coil comes in a cabinet, painted architectural gray that protects it from UV rays and keeps it rust-resistant.  This Goodman 1.5- 2 ton horizontal coil is ideal to be used with R-22 and R-410a refrigerants.   The drain pains ensure there is less water retention, keeping it away from rusting.

Features of Goodman 1.5-2 Ton Horizontal Evaporator Coil 14" wide

  • Horizontal Airflow
  • Coil Size  20-1/8"W x 12"H
  • Corrugated aluminium  fin coils
  • Easy access through split-seam front
  • 10 years parts warranty
  • Rifled copper tubing

 

 

     PLEASE BE AWARE!

Due to new federal regulations on SEER RATINGS some of our products may not be sold in your region. Please check the map below to find the SEER rating for your state as this AIR CONDITIONER is a 13 SEER and may only be sold in the NORTHERN region.  

  • Item #: GSX130181/GMS80403AN
  • Manufacturer's Product Number: **GSX130181/GMS80403AN**
  • Condition: New

1.5 Ton 13 SEER AC with Upflow/Horizontal 80% 40000 BTU Furnace

Price: $2,364.33
Sale Price: $1,394.95
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review