1.5 Ton 13 SEER AC with Upflow 60,000 BTU 80% AFUE Gas System
Click To Enlarge

 

The Goodman GSX130181 1.5 ton 13 SEER Air Conditioner with R-410a liquid refrigerant is one of those rare air conditioners that provide efficient cooling performance and last for a very long time as well. Goodman air conditioners are few of the air conditioners that employ the chlorine free liquid refrigerant method, that makes it friendly to the ozone layer in the atmosphere, and the noise performance is considered to be the best by HVAC experts.

 

Due to its 13 SEER rating, it is going to cut down on your electricity expense and high efficiency Copeland processor will provide efficient cooling for a very long time.

 

Features of Goodman GSX130181 1.5 Ton 13 SEER Air Conditioner

 

  • Liquid refrigerant return protection
  • Condenser fan motor (850 RPM)
  • Heavy gauged galvanized steel cabinet
  • Steel louvered coil guard
  • Suction line valves and Brass liquid
  • Liquid lined filter dryer
  • Aluminum fin coil 
  • Ground lug connection 
  • Contactor with lug connection 

GMS80603AN Gas Furnace 80% AFUE,Multi-Position Installation.

The GMS80403AN 60,000 BTU up to 80% AFUE Performance Upflow gas furnace system from Goodman features several components that significantly enhance the efficiency and overall comfort of your home. The Goodman GMS80603AN furnaces feature the award winning, durable aluminized steel, reframed into a dual diameter configuration that vastly increases the reliability, durability and efficiency of the furnace. Not only this, this furnace incorporates a well insulated, heavy gauge steel cabinet that contributes in lowering the system operational sound levels to a negligible extent, providing comfortable and quiet heating for your home.

This furnace also features a patented aluminized steel tubular heat exchanger and a fully insulated Silicon Nitride hot surface ignition system. The entire furnace is run tested in the factory tested prior to shipment for both heating and heating/cooling system combinations. Though, the GMS80603AN furnaces are originally meant to burn natural gas, it can also be converted to a propane gas burning unit using an optional LPM-06 field installed propane conversion kit . The GMS8 60,000 BTU 80% AFUE furnace system requires a single stage thermostat whose heating stages are predominantly controlled by a timer fitted into the control board.

Product Features:

  • Two stage gas valve control technology enables the installer to activate the two stage valve with the flip of a dip switch
  • Four speed, quiet, direct drive circulating blower motor
  • Most of the models are available with lower NOx emissions
  • 110V Silicon Nitride igniter
  • Control board has the provision to store the last 5 diagnostic codes in memory
  • Self adjusting features enables automatic adjustment of the furnace to a high or low stage operation based on the outdoor temperature without an external temperature sensor
  • The furnace control board has self diagnostics, color coded
  • Low Constant fan allows the users to activate the low heat speed for even circulation of air throughout the home
  • Certain models available with lower NOx emissions
  • Energy-saving, reliable hot surface ignition system with patented adaptive learning algorithm to maximize igniter life
  • Outlet air-limit switch, Multiple flame roll-out switches, blower door safety switch and pressure switch for proof of combustion air
  • Corrosion-resistant, quiet,  induced draft blower assembly
  • Aluminized steel inshot burners
  • A combustion rotating air blower (GMS8) that provides the option of venting the furnace through the top, right-hand side or left-hand side
  • 40VA transformer for heating and air conditioning control service
  • Combination redundant gas valve and regulator
  • Convenient left or right connection for gas and electric service
  • Attractive architectural gray paint finish
  • Heavy-gauge, fully insulated,  reinforced steel cabinet with long lasting baked-enamel finish
  • Coil and furnace fit flush for easy installation
  • Removable, solid-bottom block off

The Goodman 1.5-2 ton evaporator coil is ideal for 1.5 and 2 ton heat pumps and split air conditioner systems. For lesser tonnages, you would require an orifice or flowrater of that tonnage. If the tonnage is more than these two tonnages, then a TXV (Thermostatic Expansion Valve) is required. This Goodman upflow/downflow evaporator coil is suitable to be used with R-22 and R-410A refrigerant. There are three rows in the coil with 14 inches width. The shipping weight is 32 lbs.

The Goodman CAPF1824A6 comes equipped in a rust-resistant cabinet with architectural gray paint. The thermoplastic drains further add to the durability because they are rust-resistant and designed to retain very less water.

Features of Goodman 1.5-2 Ton Upflow/Downflow Evaporator Coil 14" wide CAPF1824A6:

  • Foil faced  insulation
  • Cabinet with split seam design for easy access
  • Corrugated aluminium fin coils and rifled tubing

 

     PLEASE BE AWARE!

 

Due to new federal regulations on SEER RATINGS some of our products may not be sold in your region. Please check the map below to find the SEER rating for your state as this AIR CONDITIONER is a 13 SEER and may only be sold in the NORTHERN region.  


  • Item #: GSX130181/CAPF1824A6/GMS80603AN
  • Manufacturer's Product Number: **GSX130181/CAPF1824A6/GMS80603AN**
  • Condition: New

1.5 Ton 13 SEER AC with Upflow 60,000 BTU 80% AFUE Gas System

Price: $2,374.55
Sale Price: $1,411.66
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review